New Build

Latest Properties

e-Go Battery Instructions

e-Go Battery

The battery comes already charged and will not need charging until exhausted. When you receive the battery, you need to click the button 5 times to activate it. When you need to charge the battery, unscrew it from the Clearomiser and screw the special CE4 USB on to the battery. Plug the USB connector into your computer or even your car if it has a USB connector. When plugging in the battery to charge, the button will flash three times and the charger’s indicator light will turn red. When the indicator light turns green, charging is complete. The battery is a long lasting Lithium battery with a capacity of 650mAh. Charging time is 2-3 hours and the battery lasts for 300 recharges. When fully charged the battery powers over 800 puffs.

Using your CE4 Electronic Cigarette

Ten seconds of continuous use causes the button to cut off. After a few seconds the device can be used normally again. If the light on your button flashes ten to fifteen times, this will probably mean that the battery needs to be recharged.


e-Go Battery 650mAh